Central Systems &
Security Services, Inc. 941.923.5233 www.central.cc
GARDALL Mechanical Dial Lock
BEFORE USING YOUR
SAFE:
Your safe has been constructed
by skilled craftsmen with the highest quality materials available and is
equipped with a precision quality security lock. Never use force on the lock
or door handle.
Operate the
combination lock several times with door open to become familiar with its
operation. Don't spin dial under any circumstance. Always rotate dial slowly,
and make certain you stop dial exactly on the combination numbers. If you
pass a number mark, start over from the beginning.
When you are familiar
with the combination lock, recall how operation felt. If you should experience
a change or different feel of operation, DO NOT LOCK SAFE. Contact the
installing company.
TO UNLOCK SAFE:
1. Turn LEFT,
stopping when ?? comes the FOURTH time to the index mark at top
of dial.
2. Turn RIGHT,
stopping when ?? comes the THIRD time to the index mark at top
of dial.
3. Turn LEFT,
stopping when ?? comes the SECOND time to the index mark at top
of dial.
4. Turn full RIGHT slowly
until dial reaches positive stopping point.
5. The door is now
ready to pull open. Turn the door handle in a counter-clockwise direction and
pull door open.
TO LOCK SAFE:
1. Close door and
turn handle clockwise to the locked position.
2. Turn dial to the
LEFT at least FOUR revolutions.
WARNING: Never slam
door. Do not close door with lock bolts in extended position.
MAINTENANCE
Although you safe has
been manufactured to the highest quality standards and is expected to give a
long life of good service, a certain amount of maintenance should be performed
on a regular basis.
1. The bolt bars that
move in and out of safe door should be lubricated once a year with a
lightweight lock lubricant.
2. After warranty, lock
should be serviced by a qualified safe man or locksmith every two years.